Public Service Vehicle Identification Regulations, 1987, H-3.1 Reg 2

1 PUBLIC SERVICE VEHICLE IDENTIFICATION H-3.1 REG 2 The Public Service Vehicle Identification Regulations, 1987 being Chapter H-3.1 Reg 2 (effective September 23, 1987) as amended by Saskatchewan Regulations 109/87. NOTE: This consolidation is not official. Amendments have been incorporated for convenience of reference and the original statutes and regulations should be consulted for all purposes of interpretation and application of the law. In order to preserve the integrity of the original statutes and regulations, errors that may have appeared are reproduced in this consolidation. 2 PUBLIC SERVICE H-3.1 REG 2 VEHICLE IDENTIFICATION CHAPTER H-3.1 REG 2 The Highway Traffic Act Title 1 These regulations may be cited as The Public Service Vehicle Identification Regulations, 1987. Prescribed identification 2 For the purposes of section 21 of The Motor Carrier Act, a truck or power unit registered as a public service vehicle is to display identification on each side of the vehicle showing: (a) in clear and easily read letters that are not less than 5 centimetres in height, the name and address of the holder of the certificate of registration for that vehicle; (b) in a clear manner and not less than 15 centimetres in height, the registered trade mark of the holder of the certificate of registration for that vehicle; or (c) any lettering or logo that may be allowed by the board. 2 Oct 87 cH-3.1 Reg 2 s2. REGINA, SASKATCHEWAN Printed by the authority of THE QUEEN’S PRINTER Copyright©1996