Chain Cables Order, 1930

S.I. No. 83/1930 - The Chain Cables Order, 1930 STATUTORY RULES AND ORDERS. 1930. No. 83. THE CHAIN CABLES ORDER, 1930 ANCHOR AND CHAIN CABLE. Tests for Chain Cables of Iron and Cast Steel. The Chain Cables Order, 1930, dated October 29, 1930, made by the Minister for Industry and Commerce under the Anchors and Chain Cables Act, 1899 (62 & Vict., c. 23). WHEREAS by section 8 of the Anchors and Chain Cables Act, 1899, it is provided, inter alia, as follows :— (1) The tensile strain and the breaking strain used for the purpose of testing anchors and chain cables shall be those specified in the Second Schedule to this Act, or such tests as are substituted by Order of the Board of Trade under this section. (2) Any test approved by the Board of Trade as a test equal or superior to either of the tests specified in the said Schedule may be substituted by Order of that Board for that test. AND WHEREAS by the Testing of Short Link Chain Cables Order, 1900, made on the 26th day made June, 1900, the Board of Trade substituted the breaking and tensile strains specified in the Schedule thereto for those specified in the Second Schedule to the said Act as the tests to be used for the purpose of testing Short Link Chain Cables of iron. AND WHEREAS it is expedient that the said Order should be revoked. AND WHEREAS the Minister for Industry and Commerce has approved the tests specified in the Schedule hereto as tests equal or superior to the tests for chain cables specified in the Second Schedule to the said Act. NOW, therefore, the Minister for Industry and Commerce, in exercise of the power conferred on him by the said section of the said Act, and of all other powers him hereunto enabling, does hereby order as follows :— 1. The tests specified in the Schedule hereto shall be and the same are hereby substituted for those specified in the Second Schedule to the Anchors and Chain Cables Act, 1899, as the tensile and breaking strains to be used for the purpose of testing chain cables. 2. The Testing of Short Link Chain Cables Order, 1900, dated the 26th day of June, 1900, is hereby revoked. 3. This Order may be cited as the Chain Cables Order, 1930. Dated the 29th day of October, 1930. By Order of the Minister, GORDON CAMPBELL, Department of Industry and Commerce, Transport and Marine Branch, Dublin. TESTS FOR CHAIN CABLES OF IRON. Stud Link Chain Cables. Breaking and Tensile Strains. 1. 2. 3. 1. 2. 3. Diameter of Iron Common Links. Breaking strain which 3 links in each 15 fathoms must withstand previous to the tensile strain being applied. Tensile strain to be applied to every 15 fathoms separately. Diameter of Iron Common Links. Breaking strain which 3 links in each 15 fathoms must withstand previous to the tensile strain being applied. Tensile strain to be applied to every 15 fathoms separately. 306 218 10 13 16 270 192 10 15 32 305 217 25 32 267 10 191 16 303 10 217 265 10 189 10 13 32 302 216 10 23 32 263 10 188 10 301 10 215 10 11 16 261 10 186 10 11 32 300 214 10 21 32 258 10 184 10 16 298 10 213 256 10 32 297 10 212 10 19 32 254 10 181 10 295 10 211 10 16 251 10 179 32 210 10 17 32 249 178 16 292 10 209 246 10 176 10 32 291 207 10 15 32 244 10 174 10 289 206 10 16 241 10 32 287 10 205 10 13 32 170 10 16 285 204 10 169 32 284 202 10 11 32 234 282 10 201 10 16 231 10 165 10 31 32 200 10 32 163 10 15 16 278 10 198 10 226 10 161 10 29 32 276 10 197 10 32 223 10 159 274 195 10 16 157 10 27 32 272 194 10 32 218 77 55 32 212 10 151 10 23 32 74 53 16 209 10 149 10 11 16 32 206 10 147 10 21 32 69 49 204 10 145 10 66 10 47 10 31 32 19 32 63 10 45 10 15 16 198 141 10 16 61 10 43 10 29 32 195 10 139 17 32 59 42 10 192 137 10 58 10 40 10 27 32 189 10 135 10 15 32 58 10 38 10 13 16 133 10 16 55 37 25 32 183 10 131 13 32 35 10 181 129 10 51 34 23 32 178 127 10 11 32 48 32 10 11 16 175 125 10 16 31 21 32 172 10 123 32 29 10 120 10 42 28 19 32 166 10 118 10 32 40 26 10 16 163 116 10 16 38 25 17 32 160 10 114 10 32 36 24 157 10 112 10 34 15 32 153 10 109 10 32 21 10 16 149 106 10 16 30 10 20 10 13 32 145 104 10 32 28 19 142 10 101 10 27 18 11 32 138 10 98 31 32 25 10 16 16 15 16 23 10 15 10 32 131 93 29 32 22 127 10 91 20 32 124 88 10 27 32 19 10 12 10 16 120 10 86 13 16 17 10 11 32 117 83 25 32 16 10 10 10 15 10 32 110 10 78 10 23 32 13 16 107 10 76 10 11 16 10 32 103 10 21 32 11 100 10 72 10 10 31 32 97 19 32 10 10 15 16 94 10 67 10 16 10 29 32 91 10 65 10 17 32 10 88 10 10 27 32 85 10 61 15 32 10 10 13 16 59 16 10 10 25 32 79 10 57 10 SHORT LINK CHAIN CABLES. Breaking and Tensile Strains. 1. 2. 3. 1. 2. 3. Diameter of Iron Common Links. Breaking strain which 3 links in each 15 fathoms must withstand previous to the tensile strain being applied. Tensile strain to be applied to every 15 fathoms separately. Diameter of Iron Common Links. Breaking strain which 3 links in each 15 fathoms must withstand previous to the tensile strain being applied. Tensile strain to be applied to every 15 fathoms separately. 96 48 32 28 10 14 10 31 93 16 27 13 ½ 15 16 90 45 32 12 ¾ 29 32 87 10 43 10 24 12 42 31 32 11 ¼ 27 32 15 16 21 10 ½ 13 16 78 10 39 10 29 32 10 10 25 32 76 38 27 32 17 8 ½ 23 32 70 10 35 10 13 16 15 10 10 11 16 34 25 32 14 10 10 21 32 65 10 32 10 6 ¾ 31 23 32 19 32 60 10 30 10 11 16 16 21 32 17 32 28 54 27 19 32 10 10 15 32 25 16 3 ¾ 16 17 32 13 32 47 10 23 10 22 15 32 11 32 21 16 2 ¼ 16 20 13 32 10 10 32 19 11 32 10 10 32 35 10 17 10 16 16 33 10 16 10 32 10 10 32 32 16 15 TESTS FOR CHAIN CABLES OF CAST STEEL. The Breaking and Tensile Strains for Chain Cables of Cast Steel shall in every case be greater by forty per cent. than those specified in this Schedule for Iron Common Links of the same type and diameter.